https://eauditor.app/
Gas Heating Installation Checklist
Section 1: Work Preparation & Customer Care
1. Gas Safe card and ACS elements correct for work to be carried out.
Yes
No
N/A
2. Reference material / Technical bulletins available.
Yes
No
N/A
3. Visual / written risk assessment completed and recorded.
Yes
No
N/A
4. Hot work permit obtained.
Yes
No
N/A
5. Fire extinguisher available.
Yes
No
N/A
6. Customer Liaison
Yes
No
N/A
7. Customer care / work area preparation completed
Yes
No
N/A
Section 2: Installation of gas pipework & valves
1. Existing gas installation inspected for suitability.
Yes
No
N/A
2. ECV correctly positioned labelled and operable
Yes
No
N/A
3. Point of entry Main equipotential bonding installed
Yes
No
N/A
4. Gas pipework correctly identified, Gas line diagram available were required
Yes
No
N/A
5. Gas pipework size support & route is correct
Yes
No
N/A
6. Gas pipework is constructed of approved materials.
Yes
No
N/A
7. Gas pipework sleeved & sleeves sealed
Yes
No
N/A
8. AECV / s correctly positioned labeled & operable
Yes
No
N/A
9. Ducts and voids ventilated correctly
Yes
No
N/A
10. Initial tightness test completed correctly
Yes
No
N/A
Section 3: Appliance / Ancillary Plant / Systems Installation.
1. Appliance Installed to manufacturers instructions
Yes
No
N/A
2. Pressure relief pipework / termination correct
Yes
No
N/A
3. Condensate pipework / termination correct.
Yes
No
N/A
4. Flue / Ductwork installed correctly
Yes
No
N/A
5. Ventilation is suitable for requirements.
Yes
No
N/A
6. Ancillary Plant installed correctly.
Yes
No
N/A
7. Systems configured correctly.
Yes
No
N/A
8. Workmanship / visual appearance suitable
Yes
No
N/A
Section 4: Electrical Tests
1. Electrical tests identified & completed correctly
Yes
No
N/A
2. Electrical isolation check completed correctly
Yes
No
N/A
3. Fuse rating checked and appropriate
Yes
No
N/A
Section 5: Commissioning
1. Final tightness test completed correctly
Yes
No
N/A
2. Purging completed correctly
Yes
No
N/A
3. Commissioned to manufacturers instructions
Yes
No
N/A
4. Flue size construction route termination and support visually examined and correct
Yes
No
N/A
5. Flue flow continuity check completed correctly
Yes
No
N/A
6. Spillage / Case seal tests completed correctly
Yes
No
N/A
7. Ventilation size and route checked and correct
Yes
No
N/A
8. Operating pressure and / or gas rate checked
Yes
No
N/A
9. Safety devices operation checked
Yes
No
N/A
10. Combustion analysis completed
Yes
No
N/A
11. All disturbed joints tested
Yes
No
N/A
12. Appliance / associated controls operating correctly
Yes
No
N/A
Section 6: Safe Working Practices
1. Safe working practices employed
Yes
No
N/A
2. Electrical equipment safety and calibration checks carried out.
Yes
No
N/A
Section 7: Completion
1. Customer instructed in use and instructions left / controls reset
Yes
No
N/A
2. Documentation completed correctly
Yes
No
N/A