https://eauditor.app/
Boiler Commissioning Checklist
Section 1: General Inspection
1. 1. What is the customer's name:
2. 2. What is the telephone Number
3. 3. What is the address:
4. 4. What is the Boiler Make and Model:
5. 5. What is the Boiler Serial Number:
6. 6. Who is it Commissioned by:
7. 7. What is the Gas Safe Register Number:
8. 8. What is the Company Name:
9. 9. What is the Company Address:
Section 2: Controls
1. 1. What is the time and temperature control for heating:
2. 2. Time and temperature control to hot water:
3. 3. Are heating zone valves fitted?
Yes
No
N/A
4. 4. Are hot water zone valves fitted?
Yes
No
N/A
5. 5. Are thermostatic radiator valves fitted?
Yes
No
N/A
6. 6. Is the automatic bypass to the system fitted?
Yes
No
N/A
7. 7. Is the boiler interlock provided?
Yes
No
N/A
8. 8. What is the programmable room thermostat temperature?
9. 9. What is the optimum start control?
10. 10. Is the combination boiler fitted?
Yes
No
N/A
Section 3: All Systems
1. 1. Have the systems been flushed and cleaned in accordance with BS7593 and the boiler manufacturer's instructions?
Yes
No
N/A
2. 2. What system cleaner was used?
3. 3. What inhibitor was used?
4. 4. Has a primary water system filter been installed?
Section 4: Central Heating Mode
1. 1. What is the Gas rate?
2. 2. What is the Burner operating pressure?
3. 3. What is the Central heating flow temperature?
4. 4. What is the Central heating return temperature?
Section 5: Combination Boilers
1. 1. Is the installation in a hard water area (above 200 ppm)?
Yes
No
N/A
2. 2. If yes, and if required by the manufacturer, has a water scale reducer been fitted?
Yes
No
N/A
3. 3. What type of scale reducer has been fitted?
Section 6: Domestic Hot Water Mode
1. 1. What is the Gas rate?
2. 2. What is the burner operating pressure (at maximum rate)?
3. 3. What is the cold water inlet temperature?
4. 4. Has hot water been checked at all outlets?
Yes
No
N/A
5. 5. What is the water flow rate
Section 7: Condensing Boilers
1. 1. Has the condensate drain been installed in accordance with the manufacturer's instructions and/or BS5546/BS6798?
Yes
No
N/A
Section 8: All Installations
1. 1. Does the heating and hot water system comply with the appropriate building regulations?
Yes
No
N/A
2. 2. Have the boiler and associated products been installed and commissioned in accordance with the manufacturer's instructions?
Yes
No
N/A
3. 3. Is the operation of the boiler and system controls demonstrated to and understood by the customer?
Yes
No
N/A
4. 4. Is the manufacturer's literature, including the benchmark checklist and service record, explained and left with the customer?
Yes
No
N/A